|
| Mark the vertical of the wall you wish to cover, then the horizontal
limit line between the upper and lower parts. Usually this is the height
of a piece of furniture, a chest of drawers, for example. Present the central upper panel and adjust its axis with the axis previously marked on the wall. Cut along the horizontal line. Repeat the operation for the lower panel. Stick the two panels, but take care that the panels stay very vertical with set square. The mastic allows a repositioning for several minutes. Let the mastic dry. Position the other panels by taking support on the central element.Use the packings to adjust to the exact width of the wall. Cover joints and baseboards allow to hide cutting defects. |
 |
| widths : 105, 75, 60, 40 millimètres height : upper panel : 193 mm. lower panel : 81 mm packing, widths : 3, 4, 5 millimetres cover joints, baseboard, mouldings : length : 320 millimètres Required tools : graduated rule, set square, hacksaw, sticking fixation mastic « any materials », file, glass paper. Electrificity : Plan and mark equipment location, drill the wall before panelling. Separate upper and lower panels, adjustable height. |
